44
6
DV MODE PROGRAMMING
Repeater name programming (R-NAME)
q
Push
[
]
(5) to enter the repeater name programming
state.
• Repeater name programming screen is displayed.
• The 1st digit blinks.
w
Push
[
]
(2) or
[
]
(8) to select the desired character, num-
ber, symbol or space.
• The selected character blinks.
• Push
[
]
(6)
to move the cursor right; push
[
]
(4) to move the
cursor left.
• Push
[CLR]
(1) to erase the selected character, or push and hold
[CLR]
(1) for 1 sec. to erase all characters following the cursor.
e
Repeat step
w
until the desired repeater name is pro-
grammed.
• Up to an 8 digit name can be set.
r
Push
[
]
(5) to program the repeater name and exit the
state.
Repeater call sign programming (CALL S)
q
Push
[
]
(5) to enter the repeater call sign programming
state.
• Repeater call sign programming screen is displayed.
• The 1st digit blinks.
w
Push
[
]
(2) or
[
]
(8) to select the desired character, num-
ber or symbol (‘/’ only).
• The selected character blinks.
• Push
[
]
(6)
to move the cursor right; push
[
]
(4) to move the
cursor left.
• Push
[CLR]
(1) to erase the selected character, or push and hold
[CLR]
(1) for 1 sec. to erase all characters following the cursor.
e
Repeat step
w
until the desired repeater call sign is pro-
grammed.
• Up to an 8 digit call sign can be set.
r
Push
[
]
(5) to program the repeater call sign and exit the
state.
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
