![background image](http://html1.mh-extra.com/html/icom/ic-e80d/ic-e80d_instruction-manual_4187689102.webp)
94
9
MEMORY/CALL CHANNELS
q
Push
[V/MHz]
to select the VFO mode.
w
Set the desired frequency:
±
Select the desired band with
[BAND]
.
±
Set the desired frequency with
[DIAL]
.
±
Or set the desired frequency with keypad directly.
In this case, the band and frequency settings with
[BAND]
and
[DIAL]
as above are not required.
±
Set other data (e.g. frequency offset, duplex direction,
tone squelch, current call signs, etc.), if desired.
e
Push and hold
[S.MW]
(M/CALL) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• “
” indication and memory channel number blink.
r
Rotate
[DIAL]
to select the desired channel.
• Call channels (C0, C1), VFO and scan edge channels (0A/0B
to 24A/24B), as well as regular memory channels, can be pro-
grammed in this way.
t
Push and hold
[S.MW]
(M/CALL) for 1 sec. to program.
• 3 beeps sound.
• Memory channel number automatically increases when continu-
ing to push and hold
[S.MW]
(M/CALL) for 1 sec. after program-
ming.
NOTE:
Push
[V/MHz]
to cancel to program and exit select
memory write mode before memory programming is fin-
ished.
[DIAL]
VFO mode
Enter select memory write mode.
to select channel 11.
Rotate
Push and hold
for 1 sec.
Channel 11
Return to the VFO mode.
Push and hold
for 1 sec. to program.
[EXAMPLE]:
Programming 145.440 MHz into memory channel 11 (blank channel).
N
Memory channel programming
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...