38
6
DV MODE PROGRAMMING
t
Repeat step
r
to enter the desired station call sign.
• Up to an 8 digit call sign can be set.
• If an unwanted character is entered, push
[
]
(6) or
[
]
(4) to
select the character, then push
[CLR]
(1) to erase the selected
character, or push and hold
[CLR]
(1) for 1 sec. to erase all char-
acters following the cursor.
y
Push
[
]
(5) to store the programmed call sign and return
to UR call sign screen.
u
Push
[MENU
]
to return to the frequency screen.
For your information
The IC-E80D has a call sign edit record function.
When editing a call sign stored in a call sign memory (or reg-
ular memory/call channel), the default setting is to store the
edited call sign into a blank channel automatically. (When all
call sign memories are already programmed, the edited call
sign will overwrite the selected channels call sign.)
The programmed call sign can be over-written when the set-
ting of “EDIT R” (Edit record) is set to OFF or SEL.
(p. 134)
However, you must manually over-write a reprogrammed call
sign in regular memory/call channels (temporary operation
without over-writing is possible).
D
Current repeater call sign programming
“RPT1” or “RPT2” can store current call sign only, and re-
peater call signs must be stored in the repeater list (p. 39).
q
Enter “RPT1” or “RPT2” in call sign screen.
MENU
¶
CALL-S
¶
RPT1 or RPT2
(Push
[MENU
]
), (Push
[
]
(2)/
[
]
(8), then push
[
]
(5).)
• RPT1/RPT2 call sign screen is displayed.
w
Push
[
]
(6) to enter call sign programming mode.
• The 1st digit blinks.
e
Push
[
]
(2) or
[
]
(8) to select the desired character or code.
• Push
[
]
(6) or
[
]
(4) to move the cursor right or left, respectively.
r
Repeat step
e
to enter the desired repeater call sign.
• Up to an 8 digit call sign can be set.
• If an unwanted character is entered, push
[
]
(6) or
[
]
(4) to
select the character, then push
[CLR]
(1) to erase the selected
character, or push and hold
[CLR]
(1) for 1 sec. to erase all char-
acters following the cursor.
t
Push
[ ]
(5) to store the programmed call sign and returns
to call sign screen.
y
Push
[MENU
]
to return to the frequency screen.
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
