Icom IC-E80D, Instruction Manual

Page: 55 / 188

47
7
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N
Digital mode operation
The IC-E80D can be operated in digital voice mode and low-
speed data operation for both transmit and receive. It can
also be connected to a GPS receiver
(compatible with an RS-
232 output/NMEA format/4800 bps/9600 bps)
to transmit/receive
position data.
N
Current call sign setting
Set the current call sign for DV operation as follows.
q
Enter “CALL-S” in MENU screen.
MENU
¶
CALL-S
(Push [MENU ] ), (Push [ ] (2)/ [ ] (8), then push [ ] (5).)
• Call sign screen is displayed.
w
Push [ ] (2) or [ ] (8) to select the desired call sign group,
“UR,” “RPT1,” “RPT2” or “MY,” then push [ ] (5).
• Current call sign is displayed.
Quick entry
Push and hold [CS] (9) for 1 sec. to enter the current call
sign mode. See next page for details.
• Call sign group
UR : Station call signs (U01–U60), “CQCQCQ” (U--) or
repeater CQ* (R-L) can be selected.
* ‘/’ plus repeater call sign (R-L), ‘/’ stands for “CQCQCQ”
RPT1 : “NOTUSE”* (R--) or repeater call signs (R-L) can be
selected.
* Direct communication (NOT USE repeater)
RPT2 : “NOTUSE”* (R--) or repeater call signs (R-L) can be
selected.
* Direct communication or using area repeater only (NOT
USE linked repeater)
MY : My call signs (MY1–MY6) can be selected.
e
Push [ ] (2) or [ ] (8) to select the desired call sign.
Or push [ ] (6) to enter the current call sign programming
state (pgs. 36–38).
• When “UR,” “RPT1” or “RPT2” is selected at step
w
, push
[BAND] several times to select the repeater call sign groups.
• When repeater call sign is selected, push and hold [CS] (9) for 1
sec. to toggle the call sign and repeater name indications.
r
Push [ ] (5) to set the selected call sign to the current call
sign and exit the state.
t
Repeat steps
w
to
r
to set the other current call sign.
y
Push [MENU ] to return to the frequency screen.