101
9
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N
Erasing/transferring bank contents
The bank contents of programmed memory channels can be
cleared or reassigned to another memory bank.
INFORMATION:
Even if the memory bank contents are
cleared, the memor y channel contents still remain
programmed.
q
Select the desired bank contents to be transferred or
erased from the bank.
(p. 96)
±
Push
[BAND]
to enter memory bank selection state.
±
Rotate
[DIAL]
to select the desired memory bank group,
then push
[BAND]
.
±
Rotate
[DIAL]
to select the bank channel.
[DIAL]
w
Push
[S.MW]
(M/CALL) for 1 sec. to enter select memory
write mode.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically, and
then “
” indication and memory channel number blink.
• Do not hold
[S.MW]
(M/CALL) for more than 2 sec., otherwise
the memory contents will be copied to VFO.
e
Push
[
]
(2) or
[
]
(8) several times to select “BANK.”
r
Push
[
]
(6) to select the bank channels selection or push
[
]
(4) to select the bank group selection to be trans-
ferred.
t
Rotate
[DIAL]
to select the desired bank group or channel.
• Select “– – – –” indication when erasing the contents from the
bank.
[DIAL]
To transfer the bank contents
to ch 11 in Bank B.
To erase
Bank channel is displayed.
is displayed.
y
Push
[S.MW]
(M/CALL) for 1 sec. to erase/transfer the bank
contents.
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
