![background image](http://html1.mh-extra.com/html/icom/ic-e80d/ic-e80d_instruction-manual_4187689106.webp)
98
9
MEMORY/CALL CHANNELS
[EXAMPLE]:
Programming the bank name “AIR” into the
scan edge channel 3A.
N
Selecting memory/bank
name indication
During memory mode operation, either the programmed
memory name or bank name can be displayed.
q
Push
[M/CALL]
to select memory mode.
w
Push and hold
[M.N]
(6) to select display indication type
from memory name, bank name and OFF.
• While pushing and holding
[M.N]
(6), rotating
[DIAL]
is also
available. (Name indication OFF
Memory Name indication
Bank name indication)
[DIAL]
Push
Bank channel is
displayed.
Name indication OFF
Memory name indication
Bank name indication
Channel
indication
disappears
NOTE:
The programmed scan name is displayed during
the programmed scan selection.
During memory mode, rotate
to select scan edge channel 3A.
Push and hold
for 1 sec.
Rotate to enter “A,”
then push .
Enter select memory write mode.
*
1
S NAME can be set for scan edge channels only.
*
2
B NAME can be set for bank assigned channels only.
Push
to select “
B NAME
*
2
.
”
Push and hold
for 1 sec. to program.
Enter “I” and “R”
with and .
Select “
M NAME
” or “
S
NAME
*
1
” when program-
ming the memory name or
the scan name, respectively.
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...