![background image](http://html1.mh-extra.com/html/icom/ic-e80d/ic-e80d_instruction-manual_4187689039.webp)
31
5
REPEATER AND DUPLEX OPERATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
Checking the repeater input signal
The transceiver can check whether the other station’s trans-
mit signal can be received directly or not, by listening on the
repeater input frequency.
±
Push and hold
[SQL]
to check whether the other station’s
transmit signal can be received directly or not.
•
When the other station’s signal can be directly received, move
to a non-repeater frequency to use simplex. (duplex OFF)
Indication while receiving
Receives –5 MHz shift frequency
Blinks while pushing and holding
[SQL]
Push and hold
D
Off band indication
If the transmit frequency is out of the amateur band, the off
band indication, “OFF,” appears on the display when
[PTT]
is
pushed. Check the frequency offset or duplex direction in this
case.
(p. 32)
CONVENIENT!
Tone scan function:
When you don’t know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
±
Push and hold
[T.SCAN]
(9) for 1 sec. to start the tone
scan. See p. 152 for more information.
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...