60
7
DV MODE OPERATION
N
Simplex operation in the VFO
D
Sending CQ
q
Set the desired frequency. (p. 23)
• Select output power, if desired. (p. 27)
w
Set the current call sign to your own call sign. (p. 47)
e
Set the current UR call sign. (p. 47)
UR call sign selection
q
Push and hold
[UR]
(
.
) for 1 sec. to enter UR call sign
selection mode.
• Push
[BAND]
several times to select “GRP CQ” (CQCQCQ)
“GRP UR” (UR call sign memories) and “CS” (current call
sign).
• DV mode is automatically selected.
w
Rotate
[DIAL]
to select “CQCQCQ.”
e
Push
[UR]
(
.
) to return to the frequency screen.
r
Push and hold
[PTT]
to transmit and speak into the micro-
phone at normal voice level.
• Tx/Rx indicator lights red and the RF meter shows the output
power.
• “CQCQCQ” is displayed and scrolled in sequence on the fre-
quency display depending on “TX CS” setting (p. 135).
t
Release
[PTT]
to return to receive.
• The other station’s call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 49 for details.
• Current call sign setting example (Simplex CQ)
UR
MY
R1: (NOT USE)
R2: (NOT USE)
My call sign
：
JA3YUA
CQ
Confirmation
q
Push and hold
[CS]
(9) for 1 sec. to enter the current call
sign mode.
• Current UR call sign is displayed.
w
Push
[
]
(2) or
[
]
(8) to select and confirm the other cur-
rent call sign.
• (“UR”), “R1,” “R2” and “MY” appears in sequence.
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
