N
Resetting
The display may occasionally display erroneous information
(e.g. when first applying power). This may be caused exter-
nally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form either or both procedures below.
• All reset
Reset the CPU before operating the transceiver for the first
time, or if the internal CPU malfunctions due to static elec-
tricity, etc. All reset clears all programming and returns all
settings to their factory defaults.
• Partial reset
Use Partial reset if you want to initialize the operating con-
ditions (VFO frequency, VFO settings, set mode contents)
without clearing the memory contents, call sign memories or
repeater lists.
D
All reset
q
Push and hold
[PWR]
for 1 sec. to turn power OFF.
w
Push and hold simultaneously
[V/MHz]
,
[M/CALL]
and
[
]
, then turn power ON to reset the CPU.
• “CLEAR” appears when resetting the CPU (See the illustration
below).
CAUTION:
Resetting the CPU returns all programmed
contents to their default settings.
158
13
OTHER FUNCTIONS
Summary of Contents for IC-E80D
Page 184: ...176 MEMO...
Page 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Page 186: ...178 MEMO...
Page 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
