![background image](http://html.mh-extra.com/html/icom/ic-2100h/ic-2100h_instruction-manual_612006020.webp)
16
3
SETTING A FREQUENCY
Ä
Push [VFO] to select VFO mode, if necessary.
Å
Push [
F
SET] one or more times until “TS” ap-
pears as shown below left.
• Push [ENT] to reverse the order of selection.
• Cancel the DTMF memory function in advance, if
necessary. (p. 44)
Ç
Push [
Y
] or [
Z
] to select the tuning step.
É
Push [CLR] to exit set mode.
■
Tuning step selection
Tuning steps are the minimum frequency change increments
when you rotate the tuning dial or push the [
Y
]/[
Z
] keys on
the microphone. The following tuning steps are available:
• 5 kHz
• 10 kHz
• 12.5 kHz
• 15 kHz
• 20 kHz
• 25 kHz
• 30 kHz
• 50 kHz
☞
NOTE: For convenience, select a tuning step that matches
the frequency intervals of repeaters in your area.
➀
Push [V/MHz] to select VFO mode, if necessary.
➁
Push [SET] one or more times until “TS” appears as shown
below.
• Pushing [MONI] reverses the order of selection.
• Cancel the DTMF memory function in advance, if necessary.
➂
Rotate the tuning dial to select the tuning step.
➃
Push [V/MHz] to exit set mode.
USING
SET MODE
9
5
1
9
5
1
15 kHz tuning step
25 kHz tuning step
SET
B