![background image](http://html.mh-extra.com/html/icom/ic-2100h/ic-2100h_instruction-manual_612006061.webp)
57
14
OTHER FUNCTIONS
■
Microphone [F-1]/[F-2] keys
Switches on the transceiver’s front panel can be assigned to
the microphone’s [F-1] and [F-2] keys.
➀
Turn power OFF.
➁
While pushing the desired switch on the transceiver and
[F-1] or [F-2] on the microphone, turn power ON.
• The function is programmed into the key ([F-1] or [F-2]).
• Default setting
The following functions are assigned to the [F-1]/[F-2] keys
when first applying power or after CPU resetting.
[F-1]: selects output power; push and hold to select duplex
setting
[F-2]: selects a tone function or none at all; push and hold to
start tone scan, push again to stop tone scan.
☞
NOTE: [F-1] and [F-2] key assignment is available for the
HM-98S
HAND MICROPHONE
only.
■
Demonstration
display
A demonstration function is available at power ON. This func-
tion gives you a quick visual introduction to the function dis-
play indicators.
➀
While pushing [T-SCAN] (3rd switch from right), push
[PWR] to turn power ON.
• The transceiver cycles through a visual tour of the function dis-
play indicators.
➁
Push any switch to exit demonstration mode and enter the
normal operating condition temporarily.
☞
NOTE: The transceiver automatically returns to demon-
stration mode after 2 min. in which no operations are per-
formed. To deactivate the demonstration display
permanently, turn power OFF, then while pushing [T-
SCAN], turn power ON again.
AT
POWER ON