![background image](http://html.mh-extra.com/html/icom/ic-2100h/ic-2100h_instruction-manual_612006036.webp)
32
7
CALL CHANNEL OPERATION
■
Calling up the call channel
Use the call channel to store a most-often-used frequency for
quick recall.
➀
Push [M/CALL] one or twice to display a large “C” in the
memory channel readout.
➁
Push [V/MHz] or [M/CALL] to exit the call channel.
Push [
(MR)
CALL] for 1 sec. to select the call chan-
nel.
■
Transferring call channel
contents
➀
Select the call channel by pushing [M/CALL] one or twice.
• A large “C” appears.
➁
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect a memory channel to transfer the contents to.
• To transfer to the VFO, push and hold [
(S.MW)
MW] instead of
pushing momentarily.
➂
Push and hold [
(S.MW)
MW] to transfer when a momentary
push was used in the previous step.
• If a name (p. 31) has been programmed into the call channel, the
name is also transferred.
Ä
Push [
(MR)
CALL] for 1 sec. to select the call
channel.
Å
Push [FUNC], then [
E
MW] momentarily.
• To transfer to the VFO, push [FUNC] then push and
hold [
E
MW] for 1 sec. instead of pushing [
E
MW]
momentarily.
Ç
Push [FUNC] then [
E
MW] for 1 sec. to transfer
when momentarily pushing [
E
MW] in step
Å
.
• If a name (p. 31) has been programmed into the call
channel, the name is also transferred.
9
5
1
9
5
1
Large “C” shows the call
channel is selected.
Small “c” shows VFO mode was
selected from the call channel.
CALL
MW
A