![background image](http://html.mh-extra.com/html/icom/ic-2100h/ic-2100h_instruction-manual_612006030.webp)
26
6
MEMORY OPERATION
■
General description
The transceiver has 107 memory channels including 6 scan
edge memory channels (3 pairs), and 1 call channel. In addi-
tion, 6 scratch pad memories are available (see p. 34). Each
of these channels can be individually programmed with the
following data.
• Operating frequency (pgs. 13)
• Duplex direction and offset (pgs. 21, 24)
• Subaudible tone encoder or tone squelch and its tone fre-
quency (pgs. 21, 47)
• Skip information* (p. 40\)
*Except for scan edge memory channels.
■
Memory channel selection
D
Using the tuning dial
➀
Push [M/CALL] once or twice to display “
!
”.
➁
Rotate the tuning dial to select the desired memory chan-
nel.
• Only programmed memory channels can be selected.
D
Using the [
Y
]/[
Z
] keys
Ä
Push [MR] to select memory mode.
Å
Push [
Y
] or [
Z
] to select and set the desired
memory channel.
• Pushing [
Y
] or [
Z
] for more than 0.5 sec. activates a
scan.
• If a scan is activated, push [
Y
] or [
Z
] again to stop it.
D
Using the keypad
Ä
Push [MR] to select memory mode.
Å
Push [
G
ENT] to activate the keypad for numeral
input.
Ç
Push 3 appropriate digit keys to input a channel
number.
• When inputting non-programmed channel numbers,
the previous memory channel appears.
• To select scan edge channels, “
M
” and “#” can be
used for A and b respectively.
MR
YZ
MR
ENT
C