![background image](http://html.mh-extra.com/html/icom/ic-2100h/ic-2100h_instruction-manual_612006052.webp)
48
12
POCKET BEEP AND TONE SQUELCH
■
Tone scan
By monitoring a signal that is being transmitted on a repeater
input frequency, you can determine the tone frequency nec-
essary to open a repeater.
➀
Set the frequency to be checked for a tone frequency e.g.
a repeater input frequency.
➁
Push [
(TONE)
T-SCAN] for 1 sec. to start the tone scan.
• To change the scanning direction, rotate the tuning dial.
➂
When the tone frequency is matched, the squelch opens
and the tone frequency is temporarily programmed into the
selected mode such as VFO, memory/call channel or
scratch pad memory.
• The tone scan pauses when a tone frequency is detected.
• The decoded tone frequency is used for the tone encoder or tone
encoder/decoder depending on the tone squelch ON/OFF set-
ting.
➃
Push [V/MHz] to stop the scan.
Ä
Set the frequency to be checked for a tone fre-
quency e.g. repeater input frequency.
Å
Push [F-2] for 1 sec. to start the tone scan.
Ç
When the tone frequency is matched, the
squelch opens and the tone frequency is pro-
grammed into the selected mode such as VFO,
memory/call channel or scratch pad memory.
É
Push [
E
CLR] to stop the scan.
☞
NOTE: The decoded tone frequency is programmed tem-
porarily when a memory or call channel is selected. How-
ever, this will be cleared when overwriting the memory/call
channel.
T SQL
9
9
5
1