![background image](http://html.mh-extra.com/html/icom/ic-2100h/ic-2100h_instruction-manual_612006009.webp)
5
1
PANEL DESCRIPTION
• “d” appears in place of the 100 MHz digit while the DTMF mem-
ory function is in use. (p. 44)
i
S/RF INDICATORS
➥
Show the relative signal strength while receiving signals.
(p. 18)
➥
Show the output power while transmitting. (p. 19)
o
MEMORY INDICATOR (p.26)
Appears when memory mode is selected.
!0
MEMORY CHANNEL READOUTS
➥
Show the selected memory channel numbers.
➥
A capital “L” appears while the frequency lock function
is in use. (p. 14)
➥
“C” appears while the call channel is selected. (p. 32)
➥
One of “L1” to “L3” appears when a simplex scratch pad
memory is selected. (p. 34)
➥
One of “r1” to “r3” appears when a duplex scratch pad
memory is selected. (p. 34)
➥
A small “c” appears when VFO mode is selected from
the call channel or a scratch pad memory.
!1
SKIP INDICATOR
Appears when the displayed memory channel is specified
as a skip channel. (p. 40)
!2
SWITCH INDICATORS
Indicate the function(s) of the front panel switches directly
below the function display.
!3
OUTPUT POWER INDICATORS (p. 19)
➥
“MID” appears when mid output power is selected.
• The IC-2100T Thailand and IC-2100H Taiwan versions have
no mid output power.
➥
“LOW” appears when low output power is selected
➥
Neither indicator appears when high output power is se-
lected.
!4
NARROW FM MODE INDICATOR
Appears when narrow FM mode is selected (available with
the Europe version only; p. 58).
!5
AUDIO MUTE INDICATOR
Appears when the audio mute function is activated via mi-
crophone control.
• This function is cancelled when any switch or control is operated.