MAINTENANCE
15
76
■
Checking the connection with the AP-3
If the IP address of each station (terminal group) is
set correctly, you can easily test whether or not IP
packets are reaching their proper destination by
using the “ping” command.
To conduct the test, open the MS-DOS window and enter
the following command:
ping xxx.xxx.xxx.xxx
where “xxx.xxx.xxx.xxx” is the IP address of the AP-
3 unit.
By executing the ping command, four pings (echo
requests) are transmitted and a reply message should be
received for each ping. If a reply is not received, check
the protocol settings of the station and the AP-3 unit, as
well as the settings of the respective wireless LAN cards
(Network Mode, ESS ID, etc.).
The message “destination unreachable” will be displayed
if the IP address and subnet mask of the station and AP-
3 unit are not set correctly.
●
[Example of ping command execution] (normal case)
Windows 98
