COMPUTER SETTINGS
5
32
Ç
-4 Macintosh Operating
System
When using a Macintosh operating system, adjust the
TCP/IP settings according to the procedure below.
Since ICOM wireless LAN cards cannot be used with
Macintosh computers, the settings explained here
are to prepare for a cable connection with the AP-3
unit.
1. Start up the computer.
2. Open the [Apple Menu] and select [Control Panel].
Then open the [TCP/IP] screen.
• Follow the instructions indicated on the screen shot
below.
Select “Ethernet.”
Select “Using DHCP server.”
5-1 Network Settings (continued)
[NOTE]
* When the network settings
are changed, the previous
setting values will be
erased.
* This procedure is based on
Mac OS J1-8.6. The order
of the steps and the
screens themselves may
vary if a different version is
used. Consult the Help files
of your Macintosh operat-
ing system for assistance.
* If a TCP/IP item is not included on the [Control
Panel], refer to the Help screen of the operating sys-
tem or the instruction manual provided with the
Ethernet card for instructions regarding how to install
the TCP/IP protocol.
3. Click the close-box button on the title bar.
• The settings are saved and the [TCP/IP] screen
closes.
4. After the computer shuts down, proceed to Chapter 6
(
☞
p. 37).
