manualshive.com logo in svg

Icom AP-3, Instruction Manual

Share
Download
Icom AP-3 Instruction Manual Download Page 63

SETTING SCREENS

8

55

8-3  [Routing Settings] Screen

■

RIP setting

When RIP is used, the AP-3 exchanges routing informa-
tion with nearby routers and access points to dynamical-
ly create a communication path. RIP packets are broad-
cast approximately every 30 seconds using the broadcast
addresses of those routers and access points.

(default value: Yes)

A setting change will not take effect until the AP-3 unit is
restarted.

■

IP routing 
information

This table displays information regarding which terminal,
access point, or router the packet should be distributed to
when the AP-3 transmits a packet. Paths added using the
[Static Routing Settings] (

☞

p. 57) are also displayed

here.

q

w

e

r

t

y

q

Destination ···············

This column shows the destination IP address of the
packet being routed.

w

Net Mask···················

This column shows the net mask corresponding to the
destination IP address of the packet being routed.

e

Gateway····················

This column shows the gateway corresponding to the
destination IP address of the packet being routed.

·············································Continued on following page

Summary of Contents for AP-3



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands