manualshive.com logo in svg

Icom AP-3, Instruction Manual

Share
Download
Icom AP-3 Instruction Manual Download Page 22

CABLE CONNECTIONS

4

14

4-1  Connecting to a Computer

* The following models of ICOM wireless LAN card can be used: SL1100 or SL-1105. 
*1. The provided Ethernet cable is a straight-through cable.
*2. Turn the power off before changing the position of the [HUB/PC] switch. 

Set the switch to “HUB” when using a cross-over cable to connect to the
Ethernet card of a computer. 

*3. ICOM wireless LAN cards do not support Macintosh.

Wireless LAN card

Wireless LAN card

DC

WIRELESS LAN CARD

ETHERNET

HUBPC

RESET

INIT

MODE

HUB/PC 

Computer

See “3-3 Inserting 
the Wireless LAN 
Card” (

☞

 p. 10) 

regarding how to 
insert the LAN 
card.

Insert into the card slot.

Ethernet cable 
(included)

*2

*3

*1

<Wireless LAN card settings>

When connecting the AP-3 to the Ethernet 
card of a computer using the provided 
Ethernet cable (straight cable), set the 
[HUB/PC] switch to “PC” as shown below.

• Set the ESS ID of the wireless 

LAN card inserted into the AP-3 
to the same value as the ESS ID 
of the wireless LAN card inserted 
into the computer. (

☞

 p. 47)

• Check the [Network Mode] setting 

of the card inserted into the 
computer. (

☞

 p. 38)

Make sure the [ESS ID] setting is 
the same as that of the card 
inserted into the AP-3. (

☞

 p. 39)

Summary of Contents for AP-3



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands