SAVING AND UPLOADING SETTING DATA
9
62
9-3 Uploading Setting Data
Follow the procedure below to upload setting data
from a computer to the AP-3.
1. Connect a setting terminal (wired or wireless) to the
AP-3.
2. From the setting terminal, double click the icon of the
stored data file.
• The [Save Settings] screen is displayed as shown
below.
3. Click the <Register to AP-3> button.
• The setting data is uploaded and the AP-3 restarts.
4. Check that the correct setting data has been uploaded
and close the setting screen.
■
Precautions
regarding editing
When editing the network IP address or other setting in
the display area, change the other related setting values
at the same time.
* Read “General Precautions” (
☞
p. 4) regarding editing
the setting data. Bear in mind that the results of any set-
ting changes will be on your own responsibility.
