AP-3 SETTINGS
6
44
6-5 Testing the Operation (continued)
6. Start up the wireless terminal (in which a wireless LAN
card has been inserted). (
☞
6-3, p. 38).
• If the connection is normal, the
lamp
(
☞
p. 6) on the front panel will illuminate.
7. Make sure you can access the setting screen of the
AP-3 from the wireless terminal (
☞
p. 42).
8. Create a test folder and set the shared folder permis-
sion so that the folder can be shared.
9. Double click the [Network Computer] icon on both the
wired terminal and the wireless terminal. The wireless
access point is functioning properly if both computers
display an icon for the other computer.
* If using Windows 2000, [Network Computer] is called
[My Network].
10. From each computer (wired and wireless), double
click the icon for the other computer. The newly cre-
ated test folder should appear.
11. After completing these steps, refer to Chapter 8 and
set up the AP-3 so it can be used in the working net-
work. Then connect the AP-3 to the network.
