SETTING SCREENS
8
50
8-1 [Wireless LAN Settings] Screen
■
MAC address
security settings
q
w
e
r
q
Use MAC Address
Security ····················
This setting item is used to select whether or not to limit
wireless connections with this AP-3 unit to those wireless
terminals having one of the MAC addresses registered
here.
(default value: No)
Setting changes will not take effect until the AP-3 unit is
restarted.
w
MAC Address on the
Wireless LAN card···
When the wireless LAN card inserted into the AP-3 is
properly recognized, the MAC address registered on the
wireless LAN card is displayed here.
e
MAC Address ···········
When the MAC Address Security function is used, the AP-
3 unit can communicate with other ICOM network devices
fitted with a wireless LAN card whose MAC address set-
ting matches one of the MAC addresses registered here.
* A maximum of 256 different MAC addresses can be reg-
istered.
* Enter 12 alphanumeric characters for each address.
* After entering the address, click <Add>. Them make
sure the new address appears in the [Current Registry].
* Hyphens are not recognized as part of the address.
Thus, the following two entries represent identical
address values:
11-11-11-22-33-33 111111223333
* See section 5-3 (
☞
p. 34) for instructions on how to
check the MAC address of a wireless LAN card.
r
<Delete> button ·······
This button is used to delete a previously registered MAC
address. When no MAC addresses are registered, this
button is not displayed.
