manualshive.com logo in svg

Icom AP-3, Instruction Manual

Share
Download
Icom AP-3 Instruction Manual Download Page 29

COMPUTER SETTINGS

5

21

5-1 Network Settings (continued)

Ç

-2 Windows NT 4.0

(WorkStation)

You will set the following
items during the proce-
dure to the right:

• IP Address
• DNS
• WINS Address
• Routing

[NOTE]
When the network settings
are changed, the previous
setting values will be erased. 

When using Windows NT 4.0, adjust the TCP/IP set-
tings according to the following procedure:
1. Start up the computer.

• The Windows NT 4.0 [Log on] screen is displayed.

2. Log on as an Administrator.
3. Click <Start> and select [Control Panel] from the

[Settings] menu. Then click the [Network] icon. The
screen shown below is displayed.

4. Follow the instructions (1 and 2) indicated on the

screen shot below.

q

Click the TCP/IP icon.

w

Click <Properties>.

* If a TCP/IP icon is not included in the list of network pro-

tocols, refer to the Help screen of the operating system
or the instruction manual provided with the Ethernet
card for instructions regarding how to install the TCP/IP
protocol.

Summary of Contents for AP-3



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands