ICI I-CAM 380 Series User Manual Download Page 73

Page: 73 / 91

I-CAM 380/I-CAM 640 P-SERIES USER MANUAL

ENSURE THE PROPER DISTANCE UNIT IS SELECTED FOR YOUR APPLICATION.

METERS, INCHES, AND YARD (CODE) UNITS ARE AVAILABLE.

MEASUREMENT IN YARDS IS AVAILABLE BY SELECTING THE CODE OPTION

FROM THE DISTANCE UNIT MENU.

8-19-7 Distance Units

By default the imager is set to measure temperatures in meters. Change the

distance unit as follows:

Press the Menu button to open the main menu.

2. Press down on the Thumbstick until the Unit Switch tab opens.

3. Using the touchscreen, tap Distance Unit. A rotary menu appears.

4. Press up or down on the Thumbstick to define distance unit: meter, inch,

or yards (code).

5. Press the Back button to save and exit the rotary menu.

6. Press the Back button to save and exit the main menu.

HIGHER MEGAPIXEL IMAGES TAKE UP MORE SPACE. OPT FOR A LOWER

RESOLUTION IMAGE IF CAPTURING A LARGE NUMBER OF IMAGES.

8-19-8 General Save Settings

8-19-8-1 Visible Camera Settings

The default resolution for visible images is 1024 x 768. Users can achieve up to

13 MP as follows:

Press the Menu button to open the main menu.

2. Press down on the Thumbstick until the Save Parameters (abbreviated

Save Param) tab opens.

3. Using the touchscreen, tap Visible Light Resolution. A rotary menu appears.

4. Press up or down on the Thumbstick to define camera resolution: 1024 x

768, 5 MP or 13 MP.

5. Press the Back button to save and exit the rotary menu.

6. Press the Back button to save and exit the main menu.

Summary of Contents for I-CAM 380 Series




























































































Search results

Summary of Contents for I-CAM 380 Series

Reviews:

Related manuals for I-CAM 380 Series

Brands by name

Popular brands

ICI I-CAM 380 Series, User Manual

Search results

Summary of Contents for I-CAM 380 Series

Reviews:

Related manuals for I-CAM 380 Series

Brands by name

Popular brands