I-CAM 380/I-CAM 640 P-SERIES USER MANUAL
69
DELETED PREFERENCES CANNOT BE RECOVERED.
8-19-3-2 Edit Preference Settings
The default global preference parameters cannot be changed; however, users
can change the thermography parameters for individual images during or after
capture (
see
Section
8-15-4 Thermography Settings
).
User created global thermography settings listed under the My Preferences
header can be edited as follows:
1.
Press the Menu button to open the main menu.
2. Press down on the Thumbstick until the Preference Settings (abbreviated
Pref Setting) tab opens.
3. Using the touchscreen, tap the edit icon of the preferences to be changed.
4. Change the parameters as follows:
•
Tap on a parameter. A rotary menu appears.
•
Press up or down on the Thumbstick to define the parameter.
•
Press the Back button to save and exit the rotary menu.
5. Repeat Step 6 for each parameter.
6. Tap Done after editing the global preferences. Sub-tab will close. Settings
are saved automatically. Tap Cancel to cancel editing process.
7. Tap the preferred preferences to enable the settings. Settings are enabled
when the check mark turns blue. To reset the device to the original global
preferences, toggle the Default Preferences (abbreviated Default Pref)
setting to the On position by tapping the switch or perform a factory reset.
8. Press the Back button to save and exit the main menu.
8-19-3-3 Delete Preference Settings
The default global preference parameters cannot be deleted. User created
global thermography settings listed under the My Preferences header can be
deleted as follows:
1.
Press the Menu button to open the main menu.
2. Press down on the Thumbstick until the Preference Settings (abbreviated
Pref Setting) tab opens.
3. Using the touchscreen, tap the trash can icon of the preferences to be
deleted.
4. Tap Delete to confirm deletion. Tap Cancel to cancel deletion.
5. Press the Back button to save and exit the main menu.
