ICI I-CAM 380 Series User Manual Download Page 30

Page: 30 / 91

I-CAM 380/I-CAM 640 P-SERIES USER MANUAL

DO NOT LOOK INTO THE FLASHLIGHT OR LASER. LOOKING INTO THE

FLASHLIGHT OR LASER MAY CAUSE EYE DAMAGE AND PERSONAL INJURY.

DO NOT POINT THE FLASHLIGHT OR LASER DIRECTLY AT PEOPLE OR

ANIMALS OR INDIRECTLY OFF REFLECTIVE SURFACES.

LEAVING THE FLASHLIGHT AND LASER ON DRAINS THE BATTERY AT AN

INCREASED RATE. POWER OFF THE FLASHLIGHT AND LASER WHEN NOT IN

DIRECT USE.

8-4 Flashlight and Laser

8-4-1 Power On/Off the Flashlight

Use the flashlight to assist visibility in dark locations.

Using the touchscreen, tap the Quick Access Menu bar located at the

bottom of the screen. Quick Access Menu opens.

2. Tap the Flashlight button to power on the light. Feature highlights blue

when enabled. Tap the Flashlight button again to power off the light.

3. Press the Back button to close the

Quick Access Menu

8-3-1 Open the main menu

Users can access the main menu either by tapping the settings button on the

touchscreen or by pressing the Menu button on the back of the device.

8-3-2 Close the main menu

Close the main menu by pressing the Close button.

Summary of Contents for I-CAM 380 Series




























































































Search results

Summary of Contents for I-CAM 380 Series

Reviews:

Related manuals for I-CAM 380 Series

Brands by name

Popular brands

ICI I-CAM 380 Series, User Manual

Search results

Summary of Contents for I-CAM 380 Series

Reviews:

Related manuals for I-CAM 380 Series

Brands by name

Popular brands