ICI I-CAM 380 Series User Manual Download Page 29

Page: 29 / 91

I-CAM 380/I-CAM 640 P-SERIES USER MANUAL

THE THERMAL IMAGER NEEDS SUFFICIENT TIME TO WARM-UP FOR THE MOST

ACCURATE TEMPERATURE MEASUREMENTS AND BEST IMAGE QUALITY.

THIS TIME CAN OFTEN VARY BY ENVIRONMENTAL CONDITIONS. IT IS BEST

TO WAIT A MINIMUM OF 10 MINUTES FOR THE DEVICE TO COMPLETELY

WARM-UP.

8-2 Power On/Off the Device

To power the device on, push and hold the Power button for 3 seconds. It takes

approximately 50 seconds for the head-up display to load and the camera to

begin taking measurements.

To power the device off, push and hold the Power button until a prompt appears.

Press OK to turn off the device. Tap Cancel to leave device powered on.

AFTER POWERING OFF, WAIT TEN SECONDS BEFORE ATTEMPTING TO

POWER THE DEVICE ON AGAIN.

8-3 User Interface

The device interface appearance:

11.

10.

Battery Life

2. Image Mode

3. Compass (enable in Settings)

4. Date/Time

5. Emissivity

6. Temperature Range

7. Measurement Point

8. Tools

9. Settings

10. Level & Span

11. Quick Access Menu

Summary of Contents for I-CAM 380 Series




























































































Search results

Summary of Contents for I-CAM 380 Series

Reviews:

Related manuals for I-CAM 380 Series

Brands by name

Popular brands

ICI I-CAM 380 Series, User Manual

Search results

Summary of Contents for I-CAM 380 Series

Reviews:

Related manuals for I-CAM 380 Series

Brands by name

Popular brands