icetro WU-0100A, Technician'S Handbook

Page: 50 / 166

Step 11
Use 1/2 of the sanitizer/water solution to
sanitize all removed components. Use a cloth or sponge to
liberally apply the solution to all surfaces of the removed
parts or soak the removed parts in the sanitizer/water
solution. Do not rinse parts after sanitizing.
Step 12 Use 1/2 of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and bin.
Use a cloth or sponge to liberally apply the solution. When
sanitizing, pay particular attention to the following areas:
• Evaporator plastic parts - including top, bottom and
sides.
• Bin bottom, sides and top.
Do not rinse the sanitized areas.
Step 13 Replace all removed components.
Step 14 Reapply power and water to the ice machine
and place the toggle switch in the WASH position.
Step 15
Add the proper amount of Ice Machine
Sanitizer to the water trough.
Model
Amount of Sanitizer
WU-0100 1.5 ounces (45 ml)
Step 16 Wait until the sanitize cycle is complete
(approximately 21 minutes) then place the 'ICE/OFF/
WASH' switch in the 'OFF' position, disconnect power and
water supplies to the ice machine.
n
Warning
Disconnect electric power to the ice machine at the
electric switch box before proceeding.
Step 17 Repeat step 6 to remove parts for hand
sanitizing.
49