icetro WU-0100A, Technician'S Handbook

Page: 43 / 166

D. Remove the Ice Thickness Probe
• Compress the side of the ice thickness probe near the
top hinge pin and remove it from the bracket.
NOTE: At this point, the ice thickness probe can easily be
descaled. If complete removal is desired disconnect the ice
thickness probe wire behind the rear bulkhead.
Ice Thickness Probe Descaling
• Mix a solution of nickle safe ice machine
cleaner and water (2 ounces of cleaner to 16 ounces of
water) in a container.
• Soak the ice thickness probe a minimum of 10 minutes.
Descale all ice thickness probe surfaces and verify the ice
thickness probe cavity is descaled. Rinse thoroughly with
clean water, then dry completely. Incomplete rinsing and
drying of the ice thickness probe can cause premature
harvest.
42