icetro WU-0100A, Technician'S Handbook

Page: 110 / 166

Ice Machine Cycles Into Harvest Before Water Contact
with the Ice Thickness Probe
Step 1
Move the 'ICE/OFF/WASH' switch to 'OFF' and
back to 'ON' to start a new cycle. Wait until the water
starts to flow over the evaporator.
Step 2
Disconnect the ice thickness probe from the
control box terminal.
Step 2 Disconnect probe from control board terminal.
Monitoring Harvest Light Correction
The ice machine remains in
the freeze sequence.
The ice thickness probe is
causing the malfunction. Verify
that the Ice Thickness probe is
adjusted correctly.
The ice machine cycles from
freeze to harvest.
The control board is causing the
malfunction.
1 09