icetro ISIV-273SHC, User Manual

Page: 42 / 124

42
[ 4 - 3 6 ] A u t o R e s t a r t
[ 4 - 3 7 ] O v e r ( L e f t )
[ 4 - 3 7 ] O v e r ( L e f t )
[ 4 - 3 7 ] O v e r ( L e f t )
[ 4 - 3 7 ] A u t o ( L e f t )
[ 4 - 3 7 ] A u t o ( L e f t )
[ 4 - 3 7 ] O v e r ( L e f t )
C u r r e n t
C u r r e n t
C u r r e n t
C u r r e n t
C u r r e n t
C u r r e n t
1 . S e n s i n g : O n
2 . D e l a y T i m e : 5 s e c
3 . O v e r C u r r e n t : 1 . 0 A
4 . O v e r T i m e : 5 s e c
5 . A u t o R e s e t : O n
6 . R e s e t C o u n t : 2
L e f t : O f f
R i g h t : O f f
7 . R e s e t F A I L a f t e r
8 . R e g e n e r a t i o n C o u n t
9 . R e g e n e r a t i o n F A I L
R e g e n e r a t i o n: O n
: 2
a f t e r S a n d b y : O n
4-37-3: Excessive current detection current setting
Soft ice cream is controlled by the value set at ‘3-1’ and the
machineis operated normally.
When troubles (lack of raw material and soforth) happen and
motor stops, this function detects it.
The value set at this category is added to the value of ‘3-1’ ,
and the function begins to be operated when the set value is
reached.
4-37-4: Excessive current detection delay time setting
Excessive current detection function is operated when
more than the value of ‘ 4-37-3 ’ is detected and the time
set at this category is passed.
4-37-5: Reset function selection
This category selects reset function when abnormal
operations
(excessive current, TP on peration, inverter trouble and so forth)
occur in the motor.
4-36: Auto selection
This selects the function to set standby when the category
‘4-35-1’ and ‘4-35-2’ are activated or automatically set auto
when supplying raw material or corn during operation.
4-37/4-37-1: Excessive current detection function selection
This category is the function to select the protection
function by detecting the excessive current of the dasher
motor.
4-37-2: No current detection is performed during the time
set at this category.
4-37-6: Reset number setting
When category ‘ 4-37-5 ’ is activated, it selects the number of resets.
4-37-7: Recycle after the number of resets is terminated.
It selects the function to recycle automatically when an
error occurs even after auto reset.
4-37-8: Recycling number setting
When category ‘ 4-37-7 ’ is activated,
it selects the number of recyclings.
4-37-9: Standby in case of defrost / auto error
It selects the function to set final standby when
the processes from ‘ 4-37-5 ’ to ‘ 4-37-8 ’ all failed.
Explanation of the function buttons (set by an Administrator)