55
Cleaning method
2. Remove the drain box up , and mount the drain tank.
3. Open the lid of the MIX TANK, and then remove and clean the carburetor
(the body), Impeller.
6. Detergent to clean the residue with clean water.
4. Press ‘ WASH’ button to operate the system, and
the press Eject button on the top right to discharge entire
soft ice cream fluid from the MIX TANK.
Then, clean the components two or three times with clean
water.
5. Press ‘ STOP’ button to stop operation of ‘ WASH’ process,
remove the impeller from the MIX TANK.
Wipe the inside of the MIX TANK with clean rag wet in neutral
detergent.(Use a neutral detergent )
1. Press ‘ STOP’ button, and then ‘ DEFROST’ on the operation panel.
(Wait about ten minutes until soft ice-cream is melted in the cylinder.)
Eject button
drain box up
vessel down
Impeller
carburetor
●
When sterilization is performed once a day, the system shall be cleaned every 14 days as
shown in the figure.
●
The carburetor, impeller, and ice cream discharge port shall be cleaned once a day.
Caution
Summary of Contents for ISIV-273SHC
