icetro ISIV-273SHC User Manual Download Page 13

Page: 13 / 124

●

Machine Installation

1. Install the spacers provided together with the

machine using the screws on the back of the machine.

2. The left, right, and back sides of the machine

must be at least 20 cm away from the wall.

3. Adjust the level of the machine using the four

level adjusting screws at the casters.

- Leveling work with the level-adjusting screws must be

performed if the floor is sloping

(to ensure convenience when removing the wood packing).

- Fix the machine with anchot bolts if necessary.

(Anchor bolts and fixing brackets are optional

(to be ordered separately).)

Step 3
- As shown in the figure, loosen screws

①

and

②

and remove the plate lock.

- Loosen screw

③

and remove the cup guide.

- Remove cup detector photo sensor

④

- Loosen screw

⑤

and remove the front cover lid.

②

③

⑤

①

⑥

④

20Cm

Summary of Contents for ISIV-273SHC





























































































































Search results

Summary of Contents for ISIV-273SHC

Reviews:

Related manuals for ISIV-273SHC

Brands by name

Popular brands

icetro ISIV-273SHC, User Manual

Search results

Summary of Contents for ISIV-273SHC

Reviews:

Related manuals for ISIV-273SHC

Brands by name

Popular brands