icetro ISIV-273SHC, User Manual

Page: 25 / 124

25
Functional description of the buttons
[ Detail description of each mode ]
[ R e g n r . ] C y l i n d e r
[ D e f r o s t ] C y l i n d e r
[ W a s h i n g ]
[ B o i l i n g ] C y l i n d e r
‘
Regeneration
’
mode.
‘
DEFROST
’
mode
‘
WASH
’
Mode
Mode of
‘
BOILING WATER
’
N o w : - 6 . 2 °C / - 6 . 2 °C
S e t : 8 . 0 °C / 8 . 0 °C
R e m a i n : 1 m i n / 1 m i n
N o w : - 6 . 2 °C / - 6 . 2 °C
S e t : 8 . 0 °C / 8 . 0 °C
R e m a i n : 1 m i n / 1 m i n
N o w : 0 . 5 A / 0 . 5 A
H o p p e r : 8 . 0 °C / 7 . 0 °C
D r u m : - 5 . 0 °C / - 4 . 0 °C
N o w : 6 . 2 °C / - 6 . 2 °C
S e t : 60 . 0 °C / 60 . 0 °C
R e m a i n : 1 0 m i n / 1 0 m i n
If the soft ice cream is not used for a long time, then its shape
will be degraded. In this case, you can use the ‘Regeneration’
function to make it look better.
Press the ‘DEFROST’ + ‘AUTO’ button at the same time for
more than 0.5 seconds, the status display window shown in
the right figure will appear.
Use the Defrost function to melt the soft ice cream
in the cylinder.
It is used to operate the impeller of the hopper and the
dasher motor of the cylinder. Mainly, the Washing function is
used to remove the water or the liquid raw material.
④
:
It displays the present current value of the dasher motor.
Heat the raw material or water in the cylinder and the
hopper to reach the set temperature in order to wash with
hot water. Press both ‘defrost’ + ‘Wash’ buttons for longer
than 1seconds to display the state window shown in the
picture on the right.
After the current temperature
( ⑥ )
reaches the set temperature
( ⑤ )
, when the retention time
( ⑦ )
passes,
the operation halts.
①
:
It displays the temperature setting of the cylinder.
⑤
:
The set temperature of the cylinder is displayed.
②
: I
t displays the current temperature of the soft ice cream.
⑥
:
The current soft ice cream temperature is displayed.
③
:
It displays the duration of time (by minute) to maintain the set temperature after the current temperature
reaches the set temperature.
⑦
:
The retention time (minutes) is displayed, after the current
temperature( ⑥ ) reaches the set temperature( ⑤ ).
②
③
⑤
⑥
⑦
④
①
For your
information
As the duration of the temperature( ③ ) maintenance expires after the current temperature( ① ) reaches
the target temperature( ① ), it will automatically enter into 'AUTO' mode to make soft ice cream.
The
‘
Regeneration
’
function refers to a process where the soft ice cream is liquidized and then
Process of producing soft ice cream; operable in "AUTO" mode only. It takes about 20 to 30 minutes.