ICC
44
a maximum of the indicated number of times. If at any time during the subsequent transmissions the
alarm condition is evaluated as “false”, then the alarm will be reset and email transmissions for this
alarm will stop (until the next time the alarm is triggered, of course).
Subject:
Enter a string of up to 128 characters in length which will appear in the “subject” line of the
alarm email. The body of the alarm email is empty.
5.9.4 Submitting
Changes
Whenever any of the Alarm configuration elements (alarm settings or email configuration parameters)
have been changed, the “submit” button located in the lower right-hand portion of the web page must be
clicked in order to write these settings to the interface card’s filesystem.
Note that because these configuration elements are read from the filesystem only when the interface
card boots up, the act of submitting configuration changes will also reset the interface card. Please
allow 30 seconds for the interface card to reboot, at which time it will then be operating with the recently-
submitted configuration. Refer to Figure 52.
Figure 52: Submit Configuration Changes
