ICC
20
2.4.2 Optional #10694 Antenna Extension Cable
ICC part #10694 is a 30cm-long antenna extension cable (refer to Figure 12). The #10694 antenna
extension cable can be used with the optional #10693 desktop antenna (refer to section 2.4.3), but it is
most commonly applied in conjunction with the standard dipole antenna (refer to section 2.4.1.) For this
scenario, the dipole antenna is first disconnected from the interface card, the #10694 antenna extension
cable inserted into the card’s RP-SMA connector, and then the dipole antenna is reconnected to the end
of the extension cable (refer to Figure 13.) For strain relief, the antenna must typically then be attached
to some fixed object (such as a ventilation slot on the inverter’s enclosure) with a plastic tie wrap.
2.4.3 Optional #10693 Desktop/Magnetic Antenna
ICC part #10693 is a desktop/magnetic mount antenna with a 1m-long extension cable (refer to Figure
14 and Figure 15.) This antenna can be used in place of the standard dipole antenna for situations
where mechanical clearances or environmental obstructions prohibit the successful application of the
standard antenna. The desktop/magnetic antenna allows convenient mounting on any flat surface
(Velcro® or double-sided tape may be required to prevent tipping or falling.) Its strong magnetic base
even allows reliable vertical mounting on metallic surfaces.
Specifications
Frequency ................... 2.4~2.5 GHz
Power Output .............. 1W
DB Gain ...................... 1.8dBi
VSWR ......................... 1.92 max.
Figure 12: Antenna Extension Cable
Figure 13: Extension Cable with Dipole Antenna
Figure 14: Desktop/Magnetic Antenna
Figure 15: Example Application
