![background image](http://html1.mh-extra.com/html/ibm/xseries-300/xseries-300_service-manual_3532656095.webp)
NAS Installation in the 29U Rack with Earthquake Feature
1. Install the NAS
«C¬
on the drawer (see Figure 5-13).
2. From the front of the rack install the upper plate
«G¬
on the NAS.
3. At the rear of the rack, secure the lower plate
«G¬
on the support
«D¬
using
screws
«H¬
.
4. On the front of the rack, secure the upper plate
«G¬
using the screws
«E¬
.
5. On the front of the rack install the retainer
«J¬
and secure it with screws
«H¬
(see Figure 5-14 on page 5-14).
C
E
D
E
G
H
Figure 5-13. NAS Installation in 29U Rack
Chapter 5. Nways Switch Administration Station FRU and Display Exchange Procedures
5-13
Summary of Contents for xSeries 300
