![background image](http://html1.mh-extra.com/html/ibm/xseries-300/xseries-300_service-manual_3532656118.webp)
c. Put the display in place (near the front of the machine).
d. Once the display is in place, secure it by tightening the screws
«F¬
.
3. Route the display power and signal cables through the top opening.
4. Reinstall the top cover
«B¬
(see Figure 6-4 on page 6-3). Be sure that the signal
and power display cables are correctly routed in the top aperture
«C¬
. Secure
the top cover with the screws
«A¬
previously removed.
5. At the rear of the Nways Switch administration station, connect the display
signal cable
«L¬
(see Figure 6-8 on page 6-7).
D
D
F
Figure 6-7. Display Installation on Top of 29U Rack
6-6
2220 Setup and Service Guide
Summary of Contents for xSeries 300
