IBM xSeries 300, Service Manual

Page: 17 / 160

b. Plug one
«T¬
connector (PN 80G0638) into the alarm and power control
(APC) card connector 4.
c. Route and plug the cable
«B¬
(PN 10K8668) from the connector 6 of the
APC card into the Ethernet card connector
«5¬
.
d. Route and plug in the cable
«C¬
(PN 80G0637) from the
«T¬
connector
located on connector 4 of the APC card to the tailgate connector J2.
e. Plug the mouse cable
«D¬
into the NAS connector
«3¬
.
f. Plug the keyboard cable
«E¬
into the NAS connector
«2¬
.
g. Plug the power cable
«F¬
into the NAS connector
«6¬
of the NAS.
4. ____ Plug the power cords
«F¬
and
«G¬
into correctly grounded electrical
outlets.
Figure 1-2. NAS Cables Installation
Installing the NAS and Its Modem
Chapter 1. Installing and Configuring the NAS and Its Modem
1-3