IBM xSeries 300, Service Manual

Page: 35 / 160

4. ____ From the front of the rack, install the upper plate
«G¬
(PN 42L2851) into
the rack (see Figure 1-25 on page 1-20). The rear part of the upper plate must
be on the top of the support
«D¬
previously installed.
5. ____ Secure the upper plate
«G¬
on the front of the rack with screws
«E¬
(PN
43G3084), and on the support
«D¬
with 8-mm M4 screws
«H¬
(see Figure 1-25
on page 1-20).
6. ____ On the front of the rack, install a retainer
«J¬
(PN 42L2853) under the
upper plate
«G¬
using the screws
«H¬
.
7. ____ From the rear of the rack, push the NAS against the retainer previously
installed. Install two retainers
«J¬
under the upper plate
«G¬
in order to maintain
the NAS. Secure them using screws
«H¬
(see Figure 1-27 on page 1-22).
Figure 1-26. Support Installation at the Rear of a 29U Rack
Installing the NAS and Its Modem
Chapter 1. Installing and Configuring the NAS and Its Modem
1-21