![background image](http://html1.mh-extra.com/html/ibm/xseries-300/xseries-300_service-manual_3532656093.webp)
6. From the rear of the rack, push the NAS against the previously installed
retainer. Install two retainers
«J¬
under the upper plate
«G¬
in order to maintain
the NAS. Secure them using screws
«H¬
.
7. Install the brackets for the display (see Figure 1-9 on page 1-8 for bracket
location).
8. Slide the display into the rack and secure it with screws
«B¬
(see Figure 5-11
on page 5-12).
Figure 5-10. NAS and Upper Plate Installation
Chapter 5. Nways Switch Administration Station FRU and Display Exchange Procedures
5-11
Summary of Contents for xSeries 300
