IBM x 340 Series, Hardware Maintenance Manual

Page: 129 / 188

Symptom-to-FRU index
121
129 (Internal cache error) 1. Processor
2. Optional Processor (if installed)
151 (Real time clock error) 1. Run Diagnostics
2. Battery
3. System Board
161 (Real time clock battery error) 1. Run Configuration/Setup
2. Battery
3. System Board
162 (Device Configuration Error)
Note: Be sure to load the default settings
and any additional desired
settings; then, save the configura-
tion.
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
163 (Real-Time Clock error) 1. Run Configuration/Setup
2. Battery
3. System Board
164 (Memory configuration changed, see
"Memory settings" on page 33.)
1. Run Configuration/Setup
2. DIMM
175 (Hardware error) 1. System Board
176 (Computer cover or cable cover was
removed without a key being used)
1. Run Configuration/Setup
2. System Board
3. C2 Security Switch
177, 178 (Security hardware error) 1. Run Configuration/Setup
2. System Board
184 (Power-on password corrupted) 1. Run Configuration/Setup
2. System Board
185 (Drive startup sequence
information corrupted)
1. Run Configuration/Setup
2. System Board
186 (Security hardware control logic
failed)
1. Run Configuration/Setup
2. System Board
187 (VPD serial number not set.) 1. Set serial number in Setup
2. System Board
188 (Bad EEPROM CRC #2) 1. Run Configuration/Setup
2. System Board
189 (An attempt was made to
access the server with invalid passwords)
1. Run Configuration/Setup, enter the administrator password
201 (Memory test error, see "Memory
Settings" on page 33.) If
the server does not have the latest level of
BIOS installed, update the BIOS to the
latest level and run the diagnostic
program again.
1. DIMM
2. System Board
Error Code/Symptom FRU/Action