IBM x 340 Series, Hardware Maintenance Manual

Page: 124 / 188

116
Hardware Maintenance Manual: xSeries 340 Model 6RY
011-XXX-000 (Failed COM1 Serial
Port test)
1. System Board
011-XXX-001 (Failed COM2 Serial
Port test)
1. System Board
014-XXX-000
(Failed Parallel Port
test)
1.
System Board
015-XXX-001 (USB interface not found,
board damaged)
1. System Board
015-XXX-015 (Failed USB external loopback
test)
1. System Board
2. Make sure parrallel port is not disabled.
3. Re-run USB external loopback test.
015-XXX-198 (USB device connected during
USB test)
1. System Board
2. Remove USB devices from USB1 and USB2.
3. Re-run USB external loopback test.
020-XXX-000 (Failed PCI Interface
test)
1. System Board
020-XXX-001 (Failed Hot-Swap
Slot 1 PCI Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
020-XXX-002 (Failed Hot-Swap Slot 2
PCI Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
020-XXX-003 (Failed Hot-Swap Slot 3
PCI Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
020-XXX-004 (Failed Hot-Swap Slot 4
PCI Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
030-XXX-000 (Failed Internal SCSI
interface test)
1. System Board
035-XXX-099
1.
No adapters were found.
2. If adapter is installed re-check connection.
035-XXX-S99 (Failed RAID test on PCI
slot S, check System Error Log before
replacing a FRU)
1. Adapter
2. SCSI Backplane
3. Cable
035-XXX-SNN (Check System Error Log
before replacing a FRU, NN = SCSI ID of
failing fixed disk)
1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
035-253-S99 (RAID adapter
initialization failure)
1. ServeRAID Adapter in slot S is not configured properly. Obtain
the basic and extended configuration status and refer to the
ServeRAID Hardware Maintenance Manual for more information.
2. Cable
3. SCSI Backplane
4. Adapter
075-XXX-000 (Failed Power Supply test) 1. Power Supply
089-XXX-001 (Failed Microprocessor
test)
1. VRM for Microprocessor 1
2. Microprocessor 1
Error Code/Symptom FRU/Action