IBM x 340 Series, Hardware Maintenance Manual

Page: 123 / 188

Symptom-to-FRU index
115
Diagnostic error codes
Note: In the following error codes, if XXX is 000, 195, or 197 do not replace a FRU.
The description for these error codes are:
000 The test passed.
195 The Esc key was pressed to abort the test.
197 This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
PCI C LED on 1. Remove all PCI adapters from slots 1-5.
2. System Board.
PS1 LED on 1. Check the DC Good LED on power supply 1. If off, replace power supply
1.
2. Power Backplane.
PS2 LED on 1. Check the DC Good LED on power supply 2. If off, replace power supply
2.
2. Power Backplane.
TEMP LED on (look at test cases) 1. Ambient temperature must be within normal operating specifications. See
“Features and specifications” on page 3.
2. Ensure fans are operating correctly.
3. Examine System Error Log.
a. System over recommended temperature
1) Information LED Panel
2) System Board
b. DASD over recommended temperature (DASD LED also on)
1) Overheating hard drive
2) DASD Backplane
3) System Board
c. System over recommended temperature for CPU X (where X is CPU 1,
2,) (CPU LED also on)
1) CPU X
d. System Board over recommended temperature
4. If the CPU LED on the diagnostics panel is also on, one of the
microprocessors has caused the error.
Error Code/Symptom FRU/Action
001-XXX-000 (Failed core tests) 1. System Board
001-XXX-001 (Failed core tests) 1. System Board
001-250-000 (Failed System Board
ECC)
1. System Board
001-250-001
(Failed System Board
ECC)
1.
System Board
005-XXX-000 (Failed Video test) 1. System Board
Diagnostic Panel LED FRU/Action