IBM RS6000 - 7026 - H70, Service Manual

Page: 291 / 358

– Ring Indicate Power-On may be set to 'Enabled' or 'Disabled'.
– Number of Rings may be set to any number from 1 to 255.
Ÿ
Reboot/Restart Policy Setup Menu, see “Reboot/Restart Policy Setup Menu”
on page B-23.
Ÿ
Power-on System
Lets you power-on the system immediately. For other power-on methods see
“System Power-On Methods” on page B-26.
Ÿ
Power-off System
Allows the user to power-off the server following a surveillance failure.
SYSTEM INFORMATION MENU
à ð
SYSTEM INFORMATION MENU
1. Read VPD
2. Read VPD Image from Last System Boot
3. Read Progress Indicators from Last System Boot
4. Read Service Processor Error Logs
5. Read System POST Errors
6. Read NVRAM
7. View System Environmental Conditions
98. Return to Previous Menu
99. Exit from Menus
á ñ
Ÿ
Read VPD
Displays manufacturer's vital product data, such as serial numbers, part
numbers, etc.
Ÿ
Read VPD Image from Last System Boot
Displays the VPD information that was in effect after the last system boot. This
information will usually be identical with the results from the menu selection
"Read VPD," but in the case of configuration updates or certain faults, this
Appendix B. Service Processor Menus
B-13