IBM RS6000 - 7026 - H70, Service Manual

Page: 268 / 358

Table A-1 (Page 1 of 9). Service Request Numbers
SRN FRU List % Problem
10101 Disk drive module 100 Description: Disk drive motor stopped.
The disk drive module is bad.
Action: If this SRN was received by one
disk drive module only, then exchange
that disk drive module.
10112 None – Description: Format degraded. A format
operation has been ended before it has
completed.
Action: Use the Format service aid to
format the disk drive module.
1 xxxx Disk drive module 100 Description: Disk drive module error.
Action: Exchange the FRU for a new
FRU.
Note: In this SRN, an x represents a
digit from 0 to F.
20PAA Disk drive module
SSA adapter card External
SSA Cables
Backplane assembly
Internal SSA Cable 45
45
6
2
2
Description: An open SSA link has been
detected.
Action: Run the Link Verification service
aid to isolate the failure. See “Link
Verification Service Aid” on page 3-73. If
the SSA service aids are not available:
Ÿ
When the failing device is an SSA
Hot-Swap Disk Drive, go to “SSA
Maintenance Analysis Procedures
(MAPs)” on page 2-35.
Ÿ
When the failing device is not an SSA
Hot-Swap Disk Drive, go to the
service information for that device.
21PAA
to
29PAA
Disk drive module
SSA adapter card
External SSA Cables
Backplane assembly
Internal SSA Cable 45
45
6
2
2
Description: An SSA
threshold-exceeded-link error has
been
detected.
Action: Run the Link Verification service
aid to isolate the failure. See “Link
Verification Service Aid” on page 3-73. If
the SSA service aids are not available:
Ÿ
When the failing device is an SSA
Hot-Swap Disk Drive, go to “SSA
Maintenance Analysis Procedures
(MAPs)” on page 2-35.
Ÿ
When the failing device is not an SSA
Hot-Swap Disk Drive, go to the
service information for that device.
A-6
Service Guide