manualshive.com logo in svg

IBM PS/2 3514, Service Information

The IBM PS/2 3514, a versatile computer system, comes with top-notch features and innovative technology. To facilitate easy troubleshooting and maintenance tasks, we provide comprehensive Service Information manuals for free download on our website. Discover detailed instructions and helpful insights to keep your PS/2 3514 running smoothly at manualshive.com.

Share
Download
background image

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96n0 ¦ Device error, position n      ¦ 86F0110  ¦ 100       ¦ Slot 1-8 ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96n1 ¦ Bus parity error, device n    ¦ 86F0110  ¦  49       ¦ Slot 1-8 ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦ 16G6990  ¦  49       ¦ D        ¦

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦ 86F0843  ¦  02       ¦ Slot 1-8 ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96n2 ¦ Communications failure,       ¦ 86F0110  ¦  48       ¦ Slot 1-8 ¦

 ¦      ¦ device n                      ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦                               ¦ 16G6990  ¦  48       ¦ D        ¦

 ¦      ¦ Perform "Problem Recovery     ¦ 86F0843  ¦  02       ¦ Slot 1-8 ¦

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦ 85F7839  ¦  02       ¦ Slot 1-8 ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96n3 ¦ Device error, position n      ¦ 86F0110  ¦ 100       ¦ Slot 1-8 ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96n7 ¦ Disk drive missing from disk  ¦ 86F0110  ¦  48       ¦ Slot 1-8 ¦

 ¦      ¦ array internal configuration  ¦ 16G6990  ¦  48       ¦ D        ¦

 ¦      ¦                               ¦ 86F0843  ¦  02       ¦ Slot 1-8 ¦

 ¦      ¦ Perform "Problem Recovery     ¦ 85F7839  ¦  02       ¦ Slot 1-8 ¦

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96nA ¦ Predictive Failure Analysis   ¦ 86F0110  ¦ 100       ¦ Slot 1-8 ¦

 ¦      ¦ threshold reached             ¦          ¦           ¦          ¦

 ¦      ¦                               ¦          ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 4b" in topic 3.5.9. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96nB ¦ Predictive Failure Analysis   ¦ 86F0110  ¦ 100       ¦ Slot 1-8 ¦

 ¦      ¦ threshold reached             ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ 96nF ¦ LRC error                     ¦ 86F0110  ¦ 100       ¦ Slot 1-8 ¦

 ¦      ¦                               ¦          ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 4a" in topic 3.5.8. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C010 ¦ Data error, sector            ¦ 16G7002  ¦ 100       ¦ Slot 1   ¦

 ¦      ¦ reassignment required         ¦ 16G7003  ¦           ¦          ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 1c" in topic 3.5.1. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C01C ¦ Disk unit,load Licensed       ¦          ¦           ¦          ¦

 ¦      ¦ Internal Code                 ¦          ¦           ¦          ¦

 ¦      ¦                               ¦          ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 2" in topic 3.5.2.  ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C020 ¦ Data error, sector            ¦ 16G7002  ¦ 100       ¦ Slot 2   ¦

 ¦      ¦ reassignment required         ¦ 16G7003  ¦           ¦          ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 1c" in topic 3.5.1. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C02C ¦ Disk unit,load Licensed       ¦          ¦           ¦          ¦

 ¦      ¦ Internal Code                 ¦          ¦           ¦          ¦

 ¦      ¦                               ¦          ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 2" in topic 3.5.2.  ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C030 ¦ Data error, sector            ¦ 16G7002  ¦ 100       ¦ Slot 3   ¦

 ¦      ¦ reassignment required         ¦ 16G7003  ¦           ¦          ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 1c" in topic 3.5.1. ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C03C ¦ Disk unit,load Licensed       ¦          ¦           ¦          ¦

 ¦      ¦ Internal Code                 ¦          ¦           ¦          ¦

 ¦      ¦                               ¦          ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 2" in topic 3.5.2.  ¦          ¦           ¦          ¦

 +------+-------------------------------+----------+-----------+----------¦

 ¦ C040 ¦ Data error, sector            ¦ 16G7002  ¦ 100       ¦ Slot 4   ¦

 ¦      ¦ reassignment required         ¦ 16G7003  ¦           ¦          ¦

 ¦      ¦                               ¦ 86F0110  ¦           ¦          ¦

 ¦      ¦ Perform "Problem Recovery     ¦          ¦           ¦          ¦

 ¦      ¦ Procedure 1c" in topic 3.5.1. ¦          ¦           ¦          ¦

3514 Service Information
Unit Reference Code Table

¦ Copyright IBM Corp. 1992, 1993

3.2 - 11

Summary of Contents for PS/2 3514
































































































































































































































Reviews:

No comments

Related manuals for PS/2 3514

IBM 2292 Hardware Maintenance Manual preview
2292
Brand: IBM Pages: 230
IBM 5150 Hardware Reference Manual preview
5150
Brand: IBM Pages: 393
DFI WM342-KD Series Installation Manual preview
WM342-KD Series
Brand: DFI Pages: 12
IBASE Technology AMI400 Series User Manual preview
AMI400 Series
Brand: IBASE Technology Pages: 19
eMachines A26EV17F (French) Manuel D'Utilisation preview
A26EV17F
Brand: eMachines Pages: 46
easescreen DE3650 User Manual preview
DE3650
Brand: easescreen Pages: 4
Uplift Desk UDA110 Instructions preview
UDA110
Brand: Uplift Desk Pages: 2
Vivo DESK-V000W Instruction Manual preview
DESK-V000W
Brand: Vivo Pages: 3
Ruijie Networks Rain400 Series Manual preview
Rain400 Series
Brand: Ruijie Networks Pages: 30
Kontron Embedded Computers JRex-IBOX User Manual preview
JRex-IBOX
Brand: Kontron Embedded Computers Pages: 48
Asus TW100-E6 Configuration Manual preview
TW100-E6
Brand: Asus Pages: 18
Asus TW300-E5/PI4 User Manual preview
TW300-E5/PI4
Brand: Asus Pages: 174
Asus TS700-E6/RS8 User Manual preview
TS700-E6/RS8
Brand: Asus Pages: 166
Dell Dimension Lxxxc Setup Manual preview
Dimension Lxxxc
Brand: Dell Pages: 10
Dell Dimension E520 Service Manual preview
Dimension E520
Brand: Dell Pages: 79
Dell Dimension 0JD176A01 Quick Setup Manual preview
Dimension 0JD176A01
Brand: Dell Pages: 2
Dell Dimension 0JG507A01 Quick Setup Manual preview
Dimension 0JG507A01
Brand: Dell Pages: 2
Dell Dimension 0MK311A00 Quick Setup Manual preview
Dimension 0MK311A00
Brand: Dell Pages: 2

Brands by name

Popular brands

Load more brands