2.6.2 How to Display the Error Log
To display information in the error log, enter the following sequence on
the 3514 control panel. This displays the first entry in the error log.
1 6 9 PICTURE 65
Using the example shown under "Marker Entries" in topic 2.6.1.2, the first
entry shown is:
1111429F
To display other entries that are in the error log, use the 3514 control
panel and enter the line number of the entry you want to display. For
example:
2 PICTURE 66 (displays the second entry)
or
3 PICTURE 67 (displays the third entry)
A time stamp for each log entry is also stored by the 3514. The time
stamp is given in 1/10-second intervals of time since ac power was
attached to the 3514. To display the time stamp of any log entry, press
the PICTURE 68 key after you display a log entry. Each time you press
the PICTURE 69 key, the display changes between the log entry and the
associated time stamp. The current log can be displayed by pressing the
Enter key PICTURE 70
When you are done with the URC error log, press the * (Home) key to clear
the display and return to ready status (*000).
3514 Service Information
How to Display the Error Log
¦ Copyright IBM Corp. 1992, 1993
2.6.2 - 1
