!
Step 3
Attach a hinge cover to each connecting arm as pictured.
Step 2
Raise the Adapt X™ main unit to a higher position so that you
can easily access the space underneath, to later attach the
keyboard tray. Grip the handles on either side of the upper
worksurface, squeeze, and lift.
Step 4
Using a Phillips head screwdriver, connect the tray
brackets to the keyboard tray using the included screws.
Note:
Tighten the screws only until the head is flush with the
tray brackets. Going any tighter may strip the screw and damage
the keyboard tray.
Main unit
Keyboard tray
Tray brackets
(qty 2)
Hinge cover
(qty 2)
Screws
(qty 8)
Cable mounts
(qty 4)
UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
®
UPLIFT Adapt X™ Instructions
UDA110
Step 1
Unpack the box and verify the contents against the parts
above. Clear off the surface you intend to use the Adapt
X™ on, and ensure there is at least 29’’w by 24’’d space for
it. Two people should lift the main unit and place it on the
intended surface.
Package contents
