IBM Netfinity 7100, User'S Reference Manual

Page: 19 / 200

Chapter 1. Introducing the IBM Netfinity 7100
5
• Information and diagnostic LED panels
• Customer support center 24 hours per day 7 days a week
1
Controls and indicators
The following illustration shows the controls and indicators on the server.
Hard-disk drive status light: Each of the hot-swap drives has a status light.
When this amber light is on continuously, the drive has failed. When the light
flashes slowly (one flash per second), the drive is being rebuilt. When the light
flashes rapidly (three flashes per second), the controller is identifying the drive.
Hard-disk activity light: Each of the hot-swap drives has a hard-disk activity
light. When this green light is flashing, the drive is being accessed.
CD-ROM eject/load button: Press this button to eject or retract the CD-ROM
tray.
CD-ROM drive in-use light: When this light is on, the CD-ROM drive is being
accessed.
Diskette-eject button: Press this button to eject a diskette from the drive.
Diskette drive in-use light: When this light is on, the diskette drive is being
accessed.
Reset button: Press this button to reset the server and run the power-on self-test
(POST).
Power control button: Press this button to manually turn on or off the server.
1.Service availability will vary by country. Response time will vary depending on the number and nature of incoming calls.
Information LED panel
Power-control button
Reset button
Diskette drive in-use light
Diskette-eject button
CD-ROM eject/load button
CD-ROM drive in-use light
Hard-disk
activity light
Hard-disk
status light